[1]王文,蒋科卫,成永忠,等.半环形外固定支架治疗C型桡骨远端骨折的稳定性有限元分析[J].中医正骨,2024,36(06):1-9，36.
　WANG Wen,JIANG Kewei,CHENG Yongzhong,et al.The stability of a semi-circular external fixator in treatment of type C distal radius fractures:a finite element analysis-based biomechanical study[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2024,36(06):1-9，36.
点击复制

半环形外固定支架治疗C型桡骨远端骨折的稳定性有限元分析()
分享到：

《中医正骨》[ISSN:1001-6015/CN:41-1162/R]

卷:
第36卷
期数:
2024年06期
页码:
1-9，36
栏目:
基础研究
出版日期:
2024-06-20

文章信息/Info

Title:
The stability of a semi-circular external fixator in treatment of type C distal radius fractures:a finite element analysis-based biomechanical study
作者:
王文1; 蒋科卫2; 成永忠2; 林晴1; 尹晓冬2; 钱秀清3; 刘广伟4
1.北京中医药大学研究生院,北京 100029; 2.中国中医科学院望京医院,北京 100102; 3.首都医科大学生物医学工程学院,北京 100069; 4.中医正骨技术北京市重点实验室,北京 100102
Author(s):
WANG Wen1; JIANG Kewei2; CHENG Yongzhong2; LIN Qing1; YIN Xiaodong2; QIAN Xiuqing3; LIU Guangwei4
1.Graduate School of Beijing University of Chinese Medicine,Beijing 100029,China2.Wangjing Hospital of CACMS,Beijing 100102,China3.School of Biomedical Engineering,Capital Medical University,Beijing 100069,China4.Beijing Key Laboratory of Orthopedics of Traditional Chinese Medicine,Beijing 100102,China
关键词:
桡骨骨折;  骨折固定术;  外固定器;  限定因素分析;  生物力学现象
Keywords:
radius fractures;  fracture fixation;  external fixators;  finite element analysis;  biomechanical phenomena
摘要:
目的:探讨半环形外固定支架治疗C型桡骨远端骨折的稳定性。方法:选取1名健康成年男性志愿者,分别采用CT和MRI扫描腕关节。基于CT和MRI扫描数据,建立正常腕关节的三维有限元模型,并对模型有效性进行验证。基于正常腕关节的三维有限元模型,建立C1、C2、C3型桡骨远端骨折有限元模型,制作并装配半环形外固定支架。分别在装配半环形外固定支架的C1、C2、C3型桡骨远端骨折有限元模型上施加轴向、旋前及掌屈载荷,记录不同载荷下3种桡骨远端骨折有限元模型桡腕关节面的轴向最大相对位移及骨折块的最大应力和最大位移。结果:①正常腕关节有限元模型构建和验证结果。本研究建立的正常腕关节有限元模型涉及1 094 717个单元,387 763个节点。在尺骨近端施加完全约束后,对模型施加100 N的轴向载荷,桡腕关节面最大应力为10.7 MPa; 桡骨远端关节面主要应力分布于桡舟关节面和桡月关节面,且桡舟关节面所承受的应力较大; 该结果与文献中尸体实验结果一致,提示正常腕关节有限元模型构建成功。②3种桡骨远端骨折有限元模型桡腕关节面的轴向最大相对位移。在轴向载荷下,C1、C2、C3型桡骨远端骨折有限元模型桡腕关节面的轴向最大相对位移依次为0.27 mm、0.14 mm、0.64 mm; 在旋前载荷下,C1、C2、C3型桡骨远端骨折有限元模型桡腕关节面的轴向最大相对位移依次为0.21 mm、0.29 mm、0.36 mm; 在掌屈载荷下,C1、C2、C3型桡骨远端骨折有限元模型桡腕关节面的轴向最大相对位移依次为0.11 mm、0.08 mm、0.24 mm。③3种桡骨远端骨折有限元模型骨折块的最大应力。在轴向载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大应力依次为5.58 MPa、20.93 MPa、40.91 MPa; 在旋前载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大应力依次为1.45 MPa、11.31 MPa、11.89 MPa; 在掌屈载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大应力依次为0.78 MPa、19.94 MPa、4.66 MPa。④3种桡骨远端骨折有限元模型骨折块的最大位移。在轴向载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大位移依次为0.63 mm、1.4 mm、1.5 mm; 在旋前载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大位移依次为0.10 mm、0.16 mm、0.16 mm; 在掌屈载荷下,C1、C2、C3型桡骨远端骨折有限元模型骨折块的最大位移依次为1.24 mm、1.15 mm、1.05 mm。结论:半环形外固定支架治疗C型桡骨远端骨折具有较好的稳定性。
Abstract:
Objective:To explore the stability of a semi-circular external fixator in treating type C distal radius fractures.Methods:A healthy adult male volunteer was selected for wrist joint scanning by using CT and MRI,respectively.Based on the CT and MRI scanning data,a three-dimensional(3D)finite element model of the normal wrist joint was established,and the validity of the model was verified.Based on the successfully established 3D finite element model,the finite element models of type C1,C2,and C3 distal radius fractures were established,and a semi-circular external fixator was fabricated and assembled.The axial,pronation and palmarflexion loads were applied to the finite element models of type C1,C2 and C3 distal radius fractures assembled with semi-circular external fixators,respectively.The maximum relative axial displacement of the radiocarpal articular surface,and the maximum stress and maximum displacement of the fractured bone in the three finite element models under the different loads were recorded.Results:①The established 3D finite element model of normal wrist joint involved 1 094 717 elements and 387 763 nodes.The maximum stress was 10.7 MPa on the radiocarpal articular surface when a 100 N axial load was applied to the model after applying a full constraint to the proximal end of the ulna.The main stress acted on the distal radius articular surface was mainly distributed on the radionavicular and radiolunate articular surfaces,with the radionavicular articular surface experiencing greater stress.This result was consistent with the results previously reported in the cadaver experiments,indicating the successful establishment of a 3D finite element model of normal wrist joint.②The maximum relative axial displacements of the radiocarpal articular surface in the finite element models of type C1,C2,and C3 distal radius fractures were 0.27,0.14,and 0.64 mm under the axial load; 0.21,0.29,and 0.36 mm under the pronation load; and 0.11,0.08,and 0.24 mm under the palmarflexion load,respectively.③The maximum stress of the fractured bone in the finite element models of type C1,C2,and C3 distal radius fractures were 5.58,20.93,and 40.91 MPa under the axial load; 1.45,11.31,and 11.89 MPa under the pronation load; and 0.78,19.94,and 4.66 MPa under the palmarflexion load,respectively.④The maximum displacement of the fractured bone in the finite element models of type C1,C2,and C3 distal radius fractures were 0.63,1.4,and 1.5 mm under the axial load; 0.10,0.16,and 0.16 mm under the pronation load; and 1.24,1.15,and 1.05 mm under the palmarflexion load,respectively.Conclusion:The semi-circular external fixator behaves good stability in the treatment of type C distal radius fractures.

参考文献/References:

[1] ANDO J,TAKAHASHI T,AE R,et al.Epidemiology of distal radius fracture:a regional population-based study in Japan[J].BMC Musculoskelet Disord,2023,24(1):478.
[2] 刘庆梁,高斌礼.桡骨远端骨折的治疗进展[J].骨科,2019,10(4):363-366.
[3] SANDER A L,LEIBLEIN M,SOMMER K,et al.Epidemi-ology and treatment of distal radius fractures:current concept based on fracture severity and not on age[J].Eur J Trauma Emerg Surg,2020,46(3):585-590.
[4] 中华医学会骨科学分会创伤骨科学组,中华医学会骨科学分会外固定与肢体重建学组.中国成人桡骨远端骨折诊疗指南(2023)[J].中华创伤骨科杂志,2023,25(1):6-13.
[5] 李柿樾,卜建文,谢增如.桡骨远端骨折的治疗进展[J].实用手外科杂志,2022,36(1):97-101.
[6] 王海羽,汤立新,郭雄飞,等.内固定与外固定桡骨远端C2和C3型骨折的比较[J].中国矫形外科杂志,2021,29(8):684-688.
[7] 庞涛,陈纪宝,郭燕芬,等.桡骨远端不稳定骨折闭合复位外固定架克氏针固定[J].中国矫形外科杂志,2024,32(6):570-573.
[8] 徐永清,钟世镇,徐达传,等.腕关节韧带的解剖学研究[J].创伤外科杂志,2006,8(1):52-54.
[9] 李永耀,赵勇,程灏,等.夹板弹性固定桡骨远端FrykmanⅧ型骨折尺侧柱稳定性的有限元分析[J].中国组织工程研究,2020,24(30):4769-4774.
[10] 钦斌,黄永火,欧阳羽,等.轴向应力作用下的舟骨有限元分析[J].第三军医大学学报,2010,32(11):1213-1215.
[11] ALI R,ILYAS A,RIAZ H,et al.Outcome of the distal ra-dius fractures managed with across wrist external fixator vs buttress plates[J].J Ayub Med Coll Abbottabad,2023,35(1):32-36.
[12] LUDVIGSEN T,MATRE K,GUDMUNDSDOTTIR R S,et al.Surgical treatment of distal radial fractures with external fixation versus volar locking plate:a multicenter rando-mized controlled trial[J].J Bone Joint Surg Am,2021,103(5):405-414.
[13] MACCAGNANO G,NOIA G,VICENTI G,et al.A prospective observational clinical and radiological study of a modular bridging external fixator for unstable distal radius fractures[J].Malays Orthop J,2021,15(3):108-114.
[14] DÜNDAR A,CANKAYA D,KARAKUS D,et al.Volar-locking plate versus external fixator in the management of distal radius fractures:An isokinetic study[J].Ulus Travma Acil Cerrahi Derg,2022,28(8):1156-1163.
[15] 金桥,成永忠,陈亦历,等.半环式外固定架治疗C型桡骨远端骨折21例[J].中国中医骨伤科杂志,2022,30(5):54-58.
[16] 贺达,成永忠,赵勇,等.半环式外固定架治疗C型桡骨远端骨折[J].中国矫形外科杂志,2019,27(8):682-686.
[17] FLEIFEL D,PYTIAK A V,JIN X,et al.Biomechanics of subcutaneous locked plating versus burke plate and external fixator for comminuted distal radius fractures[J].Cureus,2023,15(5):e39142.
[18] HAJIANPOUR M A,SANO T,OUELLETTE E A,et al.Biomechanical comparison between volar plate fixator and nonbridge external wrist fixator[J].J Long Term Eff Med Implants,2020,30(2):131-134.
[19] DODDS S D,CORNELISSEN S,JOSSAN S,et al.A biomechanical comparison of fragment-specific fixation and augmented external fixation for intra-articular distal radius fractures[J].J Hand Surg Am,2002,27(6):953-964.
[20] WOLF J C,WEIL W M,HANEL D P,et al.A biomechanic comparison of an internal radiocarpal-spanning 2.4-mm locking plate and external fixation in a model of distal radius fractures[J].J Hand Surg Am,2006,31(10):1578-1586.
[21] GOSLINGS J C,FERGUSON S J,PERREN R A,et al.Biomechanical analysis of dynamic external fixation devices for the treatment of distal radial fractures[J].J Trauma,1999,46(3):407-412.
[22] 林旭,刘跃辉,吴刚,等.跨腕关节支撑钢板外固定架治疗桡骨远端粉碎性骨折的生物力学实验[J].西部医学,2012,24(8):1455-1459.
[23] 姚俊铭.外固定支架与锁定钢板固定桡骨远端骨折的有限元分析[D].广州:南方医科大学,2024.
[24] DING Y,GUAN B,LIN S,et al.Finite element analysis of non-bridged external-fixation frames for the treatment of AO A2.2 fractures of distal radius[J].Asian J Surg,2024,47(2):1075-1076.
[25] 李海波,马宝通.指套牵引联合手法复位外固定治疗老年桡骨远端骨折的临床效果[J].中国中西医结合外科杂志,2024,30(2):199-203.
[26] BLIVEN E K,GREINWALD M,HACKL S,et al.External fixation of the lower extremities:Biomechanical perspective and recent innovations[J].Injury,2019,50(Suppl 1):S10-S17.
[27] LINDAU T.Arthroscopic treatment of distal radius frac-ture[J].Chir Main,2006,25(S1):S161-S170.
[28] 苑海洋.腕关节镜辅助治疗桡骨远端关节内骨折的临床研究[D].大连:大连医科大学,2019.
[29] CHEN Y,HUANG X,CHENG Y,et al.Effects and anti-rotation stabilization of the non-bridging external fixation for pronation-abduction stage iii ankle fracture:a cadaveric study[J].Biomed Res Int,2021:9966344.
[30] 陈奕历.撬拨复位马蹄环型外固定架固定前柱损伤型Pilon骨折实验研究[D].北京:中国中医科学院,2023.

相似文献/References:

[1]温超海,何忠,李永斌,等.闭合复位伽玛钉改良成锁定支架内固定治疗 老年股骨转子间骨折[J].中医正骨,2015,27(11):32.
[2]肖善富,张喜善,于凤珍.髌下小切口钢丝纽扣式内固定治疗胫骨髁间隆突骨折[J].中医正骨,2015,27(11):34.
[3]朱峰,宋相建,吴蔚,等.手法复位经皮克氏针内固定治疗 儿童闭合性肱骨远端全骨骺分离[J].中医正骨,2015,27(11):51.
[4]裘人华,胡培阳,裘天强,等.闭合复位外固定架固定治疗Colles骨折[J].中医正骨,2015,27(11):59.
[5]张容超,徐卫国,万春友,等.手法整复小夹板固定治疗桡骨远端骨折168例[J].中医正骨,2015,27(11):61.
[6]葛波涌,王玉波,王明太,等.交锁髓内钉内固定治疗胫骨干骨折的临床研究[J].中医正骨,2015,27(10):8.
　GE Boyong,WANG Yubo,WANG Mingtai,et al.Clinical study on the internal fixation with interlocking intramedullary nail for the treatment of tibial shaft fractures[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2015,27(06):8.
[7]邓红敏,刘志诚.转子间斜行截骨结合股骨近端防旋髓内钉固定治疗 股骨近端骨折术后髋内翻畸形[J].中医正骨,2015,27(10):17.
[8]孙群周,阮成群,李光明,等.股骨近端防旋髓内钉内固定治疗 老年不稳定型股骨转子间骨折[J].中医正骨,2015,27(10):20.
[9]方策,倪新宇,王宏伟,等.迟氏正骨手法复位单臂外固定支架固定治疗 老年股骨转子间骨折[J].中医正骨,2015,27(10):22.
[10]全先辉,万春友,刘磊,等.Taylor空间支架外固定治疗胫腓骨开放性骨折[J].中医正骨,2015,27(10):30.
[11]赵萌,陈云丰,周祖忠.切开复位T形钢板联合空心钉内固定治疗 MasonⅢ型桡骨头骨折[J].中医正骨,2015,27(07):58.
[12]刘昕,邓志强,叶家军.撬拨复位弹性髓内钉固定治疗JudetⅣ型儿童桡骨颈骨折[J].中医正骨,2015,27(12):65.
[13]刘欣,刘文刚,吴淮,等.3种方法治疗C型桡骨远端骨折的对比研究[J].中医正骨,2015,27(05):12.
　LIU Xin,LIU Wengang,WU Huai,et al.A comparative study of three methods for treatment of type C distal radius fractures[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2015,27(06):12.
[14]郭世明,石玲玲,郭志民,等.手法复位石膏外固定和切开复位钢板内固定治疗 骨质疏松性桡骨远端骨折的比较研究[J].中医正骨,2015,27(04):15.
　GUO Shiming,SHI Lingling,GUO Zhimin,et al.A comparative study of manual reduction and plaster external fixation versus open reduction and plate internal fixation for treatment of osteoporotic distal radius fractures[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2015,27(06):15.
[15]王国林,高彦平,樊培新.手法复位经皮克氏针内固定硫酸钙填充治疗桡骨远端粉碎性骨折[J].中医正骨,2016,28(03):48.
[16]吴明烟,刘梦飞.掌侧万向锁定加压钢板内固定治疗桡骨远端分水岭线以远骨折[J].中医正骨,2016,28(06):36.
[17]谢正虎,董霞,袁荣霞,等.手法复位夹板外固定与切开复位钢板内固定治疗老年桡骨远端C型骨折的比较研究[J].中医正骨,2016,28(10):18.
　XIE Zhenghu,DONG Xia,YUAN Rongxia,et al.A comparative study of manipulative reduction and splint external fixation versus open reduction and plate internal fixation for treatment of type-C fractures of distal radius in the aged[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2016,28(06):18.
[18]贾高永,潘浩,胡庆丰,等.切开复位Bold钉内固定治疗MasonⅡ、Ⅲ型桡骨头骨折[J].中医正骨,2016,28(12):49.
[19]舒畅,陈虹炉,李智豪.掌背侧双钢板内固定治疗桡骨远端复杂不稳定性骨折[J].中医正骨,2017,29(01):63.
[20]霍乐乐,周中华,樊立波,等.闭合复位经皮穿针固定联合微创植骨治疗桡骨远端骨折[J].中医正骨,2017,29(02):65.

备注/Memo

备注/Memo:
基金项目:首都临床特色诊疗技术研究及转化应用项目(Z221100007422075); 国家自然科学基金项目(82274561); 中国中医科学院科技创新工程项目(CI2021A02008)
通讯作者:蒋科卫 E-mail:eear@163.com
更新日期/Last Update: 1900-01-01