参考文献/References:
[1] CHEN Q,BRAHIMAJ B C,KHANNA R,et al.Posterior atlantoaxial fusion:a comprehensive review of surgical techniques and relevant vascular anomalies[J].J Spine Surg,2020,6(1):164-180.
[2] BUNMAPRASERT T,TRIRATTANAPIKUL V,SUGANDHAVESA N,et al.Reducible nonunited typeⅡodontoid fracture with atlantoaxial instability:outcomes of two different fixation techniques[J].Int J Environ Res Public Health,2021,18(15):7990.
[3] TAN K A,LIN S,CHIN B Z,et al.Anatomic techniques for cervical pedicle screw placement[J].J Spine Surg,2020,6(1):262-273.
[4] LI T,YIN Y H,QIAO G Y,et al.Three-dimensional evaluation and classification of the anatomy variations of vertebral artery at the craniovertebral junction in 120 patients of basilar invagination and atlas occipitalization[J].Oper Neurosurg(Hagerstown),2019,17(6):594-602.
[5] TAN L A,KASLIWAL M K,GERARD C S,et al.Surgical considerations in posterior C1-2 instrumentation in the presence of vertebral artery anomalies:case illustration and review of literature[J].Br J Neurosurg,2019,33(4):422-424.
[6] KLEPINOWSKI T,PALA B,CEMBIK J,et al.Prevalence of high-riding vertebral artery:a meta-analysis of the anatomical variant affecting choice of craniocervical fusion method and its outcome[J].World Neurosurg,2020,143:e474-e481.
[7] 王建华,尹庆水,夏虹,等.枢椎椎动脉孔解剖分型与椎弓根置钉关系的研究[J].中国脊柱脊髓杂志,2006,16(9):677-680.
[8] KLEPINOWSKI T,ZYLKA N,PALA B,et al.Prevalence of high-riding vertebral arteries and narrow C2 pedicles among central-european population:a computed tomography-based study[J].Neurosurg Rev,2021,44(6):3277-3282.
[9] KOTHARI M K,DALVIE S S,GUPTA S,et al.The C2 pedicle width,pars length,and laminar thickness in concurrent ipsilateral ponticulus posticus and high-riding vertebral artery:a radiological computed tomography scan-based study[J].Asian Spine J,2019,13(2):290-295.
[10] 黄学良,朱双芳,林雨聪,等.三维重建CT血管造影在C1-2水平椎动脉变异诊断中的价值[J].中国脊柱脊髓杂志,2018,28(4):315-319.
[11] BLOCH O,HOLLY LT,PARK J,et al.Effect of frameless stereotaxy on the accuracy of C1-2 transarticular screw placement[J].J Neurosurg,2001,95(1 Suppl):74-79.
[12] LEE S H,PARK D H,KIM S D,et al.Analysis of 3-dimensional course of the intra-axial vertebral artery for C2 pedicle screw trajectory:a computed tomographic study[J].Spine(Phila Pa 1976),2014,39(17):E1010-E1014.
[13] MAGERL F,SEEMANN P S.Stable posterior fusion of the atlas and axis by transarticular screw fixation[M].Vienna:Springer,1987:322–327.
[14] YEOM J S,BUCHOWSKI J M,KIM H J,et al.Risk of vertebral artery injury:comparison between C1-C2 transarti-cular and C2 pedicle screws[J].Spine J,2013,13(7):775-785.
[15] 黄觅,李晓兰,郭亮,等.基于CTA多平面重建对后路寰枢椎经关节螺钉与枢椎椎弓根螺钉固定术的安全性比较[J].中国CT和MRI杂志,2021,19(2):136-139.
[16] 宋士学,陈语,郑亮,等.寰枢椎螺钉内固定融合术治疗寰枢椎失稳的并发症分析[J].中医正骨,2020,32(4):68-71.
[17] LEE J H,JAHNG T A,CHUNG C K.C1-2 transarticular screw fixation in high-riding vertebral artery:suggestion of new trajectory[J].J Spinal Disord Tech,2007,20(7):499-504.
[18] NEO M,MATSUSHITA M,IWASHITA Y,et al.Atlantoaxial transarticular screw fixation for a high-riding vertebral artery[J].Spine(Phila Pa 1976),2003,28(7):666-670.
[19] GOEL A,LAHERI V.Plate and screw fixation for atlanto-axial subluxation[J].Acta Neurochir(Wien),1994,129(1-2):47-53.
[20] ZHANG L,WANG H.Biomechanical effects of lateral inclination C1 and C2 pedicle screws on atlantoaxial fix-ation[J].Orthop Surg,2021,13(7):2027-2033.
[21] AZIMI P,YAZDANIAN T,BENZEL E C,et al.Accuracy and safety of C2 pedicle or pars screw placement:a syste-matic review and meta-analysis[J].J Orthop Surg Res,2020,15(1):272.
[22] PRAGASH V,DOURAISWAMI B,SUBRAMANI S.Axis vertebral dimensions for safe screw placement:a CT normative data analysis[J].J Clin Orthop Trauma,2020,11(5):871-875.
[23] 田野,张嘉男,陈浩,等.3D打印导板辅助椎动脉高跨患者C2椎弓根螺钉置入的临床研究[J].中国脊柱脊髓杂志,2020,30(4):323-330.
[24] MAHESH B,UPENDRA B,RAGHAVENDRA R.Accep-table errors with evaluation of 577 cervical pedicle screw placements[J].Eur Spine J,2020,29(5):1043-1051.
[25] WRIGHT N M.Posterior C2 fixation using bilateral,crossing C2 laminar screws:case series and technical note[J].J Spinal Disord Tech,2004,17(2):158-162.
[26] MA X Y,YIN Q S,WU Z H,et al.C2 anatomy and dimensions relative to translaminar screw placement in an Asian population[J].Spine(Phila Pa 1976),2010,35(6):704-708.
[27] WANG Y,WANG C,YAN M.Clinical outcomes of atlantoaxial dislocation combined with high-riding vertebral artery using C2 translaminar screws[J].World Neurosurg,2019,122:e1511-e1518.
[28] TSUJI T,CHIBA K,HORIUCHI Y,et al.Atlantoaxial stabilization using C1 and C2 laminar screw fixation[J].Asian Spine J,2017,11(2):314-318.
[29] 董自强,赵改平,毕厚海,等.伴椎动脉高跨的Ⅱ型齿状突骨折后路寰枢椎固定术的有限元分析[J].中国生物医学工程学报,2020,39(4):459-465.
[30] HUANG J,WANG X,NIE Q,et al.A novel construct incorporating C2 unilateral pedicle and contralateral translaminar screws for occipitocervical internal fixation:an in vitro biomechanical study[J].World Neurosurg,2021,149:e1166-e1173.
[31] 周树一,李豪杰,王扬,等.上颈椎后路内固定技术的研究进展[J].中医正骨,2020,32(11):24-28.
[32] CHEN Q,BRAHIMAJ B C,KHANNA R,et al.Posterior atlantoaxial fusion:a comprehensive review of surgical techniques and relevant vascular anomalies[J].J Spine Surg,2020,6(1):164-180.
[33] SHAO M,DAI Y,ZHU W,et al.Bicortical short C2 pars screw fixation for high-riding vertebral artery provided sufficient biomechanical stability:a finite element study[J].Spine(Phila Pa 1976),2022,47(4):369-375.
[34] SCHLEICHER P,ONAL M B,HEMBERGER F,et al.The C2-pars interarticularis screw as an alternative in atlanto-axial stabilization.A biomechanical comparison of established techniques[J].Turk Neurosurg,2018,28(6):995-1004.
[35] SAI KIRAN N A,SIVARAJU L,VIDYASAGAR K,et al.Safety and accuracy of anatomic and lateral fluoroscopic-guided placement of C2 pars/pedicle screws and C1 lateral mass screws,and freehand placement of C2 laminar screws[J].World Neurosurg,2018,118:e304-e315.
[36] DOU N,LEHRMAN J N,NEWCOMB A,et al.A novel C2 screw trajectory:preliminary anatomic feasibility and biomechanical comparison[J].World Neurosurg,2018,113:e93-e100.
[37] 刘观燚,徐荣明,马维虎,等.枢椎棘突螺钉与椎弓根螺钉固定的生物力学拔出力比较[J].中华创伤骨科杂志,2012,14(4):318-320.
[38] NAGATA K,BABA S,CHIKUDA H,et al.Use of C2 spinous process screw for posterior cervical fixation as substitute for laminar screw in a patient with thin laminae[J].BMJ Case Rep,2013,2013:bcr2013009889.
[39] LIU G,LI Q,SHENG F,et al.Outcomes of occipitocervical fixation using a spinous process screw in C2 as a third anchor point for occipitocervical fixation:a case presenta-tion[J].BMC Musculoskelet Disord,2020,21(1):307.
[40] WONG T S,ABDUL RASHID M L,HASAN M S,et al.C1-C2 fusion with absence of C1 posterior arch and presence of C2 high-riding vertebral artery:is it po-ssible?[J].J Orthop Surg(Hong Kong),2019,27(2):2309499019840763.
[41] WANG S,TIAN Y,DIEBO B G,et al.Treatment of atlantoaxial dislocations among patients with cervical osseous or vascular abnormalities utilizing hybrid techniques[J].J Neurosurg Spine,2018,29(2):135-143.
[42] 王圣林,田英轮,许南方,等.颈椎后路“组合式”内固定治疗寰枢关节不稳或脱位的临床疗效[J].中国脊柱脊髓杂志,2020,30(4):338-345.
(收稿日期:2022-05-30 本文编辑:李晓乐)
相似文献/References:
[1]王世龙,苏纪权,刘岩,等.前路融合内固定术联合中医药疗法治疗Hangman骨折[J].中医正骨,2015,27(03):54.
[2]刘建航,陈道云,黄勇,等.手法治疗颈源性头痛临床疗效的Meta分析[J].中医正骨,2016,28(01):28.
LIU Jianhang,CHEN Daoyun,HUANG Yong,et al.A meta analysis on the clinical curative effect of manipulation on cervical headache[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2016,28(02):28.
[3]梅伟,高晓群.前路复位椎间植骨融合内固定术治疗
单节段下颈椎骨折脱位合并关节突交锁[J].中医正骨,2016,28(03):42.
[4]孙兰芬,王龙强,刘润宏,等.颈椎骨折脱位合并脊髓损伤截瘫患者的围手术期护理[J].中医正骨,2016,28(03):79.
[5]孙旗,吴齐飞,郑晨颖,等.颈椎前路手术后咽痛的防治进展[J].中医正骨,2016,28(05):22.
[6]毕 锴.颈椎手法常见高危禁忌证的X线诊断[J].中医正骨,2016,28(08):73.
[7]邓真,王辉昊,王宽,等.C2～T1三维有限元模型的建立和验证[J].中医正骨,2016,28(10):1.
DENG Zhen,WANG Huihao,WANG Kuan,et al.Establishment and verification of three-dimensional finite element model of C2-T1 vertebrae[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2016,28(02):1.
[8]陈海龙,郑九琴,朱文潇,等.常规颅骨牵引和全身麻醉下手法复位在下颈椎脱位前路减压植骨融合内固定术中的应用[J].中医正骨,2017,29(07):74.
[9]沈知彼,王辉昊,王宽,等.颈椎定位旋转扳法对不同曲度颈椎内部结构应力的影响[J].中医正骨,2018,30(03):8.
SHEN Zhibi,WANG Huihao,WANG Kuan,et al.Effect of cervical fixed-position rotary pulling manipulation on internal structure stresses of cervical vertebrae with different curvature[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2018,30(02):8.
[10]邓真,王辉昊,王宽,等.石氏伤科颈椎定位旋转扳法的动力学参数在体测量[J].中医正骨,2018,30(03):17.
DENG Zhen,WANG Huihao,WANG Kuan,et al.In vivo measurement of kinetic parameters of cervical fixed-position rotary pulling manipulation of Shi's department of traumatology[J].The Journal of Traditional Chinese Orthopedics and Traumatology,2018,30(02):17.
[11]杨海云,邓强,朱宝,等.齿状突加冠综合征1例[J].中医正骨,2022,34(02):77.