参考文献/References:
[1] TAKAYASU M,AOYAMA M,JOKO M,et al.Surgical intervention for instability of the craniovertebral junction[J].Neurol Med Chir(Tokyo),2016,56(8):465-475.
[2] GUAN J,CHEN Z,WU H.Effectiveness of posterior reduction and fixation in atlantoaxial dislocation:a retrospective cohort study of 135 patients with a treatment algorithm proposal[J].Eur Spine J,2019,28(5):1053-1063.
[3] JOAQUIM A F,OSORIO J A,RIEW K D.Occipitocervical fixation:general considerations and surgical technique[J].Global Spine J,2020,10(5):647-656.
[4] DU Y K,LI S Y,YANG W J,et al.Morphometric trajectory analysis for occipital condyle screws[J].Orthop Surg,2020,12(3):931-937.
[5] BOSCO A,ALEEM I,LA MARCA F.Occipital condyle screws:indications and technique [J].J Spine Surg,2020,6(1):156-163.
[6] 李国庆,马维虎,孙韶华,等.后路枕骨髁螺钉通道的影像解剖学研究[J].中华创伤杂志,2015,31(3):273-277.
[7] KUMAR A,ONGGO J,FON L H,et al.Direct fixation of C1 jefferson fracture using C1 lateral mass screws:a case report[J].Int J Spine Surg,2019,13(4):345-349.
[8] LIU H,ZHANG B,LEI J,et al.Biomechanical role of the C1 lateral mass screws in occipitoatlantoaxial fixation:a finite element analysis[J].Spine(Phila Pa 1976),2016,41(22):E1312-E1318.
[9] DONNELLAN M B,SERGIDES I G,SEARS W R.Atlantoaxial stabilization using multiaxial C-1 posterior arch screws[J].J Neurosurg Spine,2008,9(6):522-527.
[10] HLUBEK R J,BOHL M A,COLE T S,et al.Safety and accuracy of freehand versus navigated C2 pars or pedicle screw placement[J].Spine J,2018,18(8):1374-1381.
[11] 王建华,尹庆水,夏虹,等.枢椎椎动脉孔解剖分型与椎弓根置钉关系的研究[J].中国脊柱脊髓杂志,2006,16(9):677-680.
[12] 唐晓军,罗玲丽,曹奇,等.枢椎以横突后支下缘与下关节突交界处为解剖标志行椎弓根植钉的CT测量[J].中南医学科学杂志,2018,46(2):123-126.
[13] 田野,张嘉男,樊勇,等.3D打印导航模板与计算机导航辅助置入C2椎弓根和侧块螺钉的对比研究[J].实用骨科杂志,2019,25(7):581-587.
[14] BRANSFORD R J,LEE M J,REIS A.Posterior fixation of the upper cervical spine:contemporary techniques[J].J Am Acad Orthop Surg,2011,19(2):63-71.
[15] SAI KIRAN N A,SIVARAJU L,VIDYASAGAR K,et al.Safety and accuracy of anatomic and lateral fluoroscopic-guided placement of C2 pars/pedicle screws and C1 lateral mass screws,and freehand placement of C2 laminar screws[J].World Neurosurg,2018,118:e304-e315.
[16] DORWARD I G,WRIGHT N M.Seven years of experience with C2 translaminar screw fixation:clinical series and review of the literature[J].Neurosurgery,2011,68(6):1491-1499.
[17] WANG Y,WANG C,YAN M.Clinical outcomes of atlantoaxial dislocation combined with high-riding vertebral artery using C2 translaminar screws[J].World Neurosurg,2019,122:e1511-e1518.
[18] LIU G,LI Q,SHENG F,et al.Outcomes of occipitocervical fixation using a spinous process screw in C2 as a third anchor point for occipitocervical fixation:a case presentation[J].BMC Musculoskelet Disord,2020,21(1):307.
[19] 刘观燚,沈锋,马维虎.枢椎棘突螺钉固定的研究进展[J].中国脊柱脊髓杂志,2019,29(9):847-850.
[20] 章允志,严望军,刘海燕,等.后路经寰枕关节螺钉固定钉道的测定[J].中国骨伤,2007,20(4):227-229.
[21] YANG J S,LI J,CHEN H,et al.Suboccipital neuralgia after C1 pedicle screw insertion:do we neglect atlantooccipital joint violation?Case report and literature review[J].BMC Surg,2019,19(1):96.
[22] MAUGHAN P H,HORN E M,THEODORE N,et al.Avulsion fracture of the foramen magnum treated with occiput-to-c1 fusion:technical case report[J].Neurosurgery,2005,57(3):E600.
[23] BAMBAKIDIS N C,FEIZ-ERFAN I,HORN E M,et al.Biomechanical comparison of occipitoatlantal screw fixation techniques[J].J Neurosurg Spine,2008,8(2):143-152.
[24] TAKIGAWA T,SIMON P,ESPINOZA ORíAS A A,et al.Biomechanical comparison of occiput C1-C2 fixation techniques:C0-C1 transarticular screw and direct occiput condyle screw[J].Spine(Phila Pa 1976),2012,37(12):E696-E701.
[25] 王翀,覃建朴,张朋云,等.Apofix内固定系统、椎弓根螺钉技术两种不同手术方法治疗创伤性寰枢椎不稳的疗效比较[J].系统医学,2016,1(5):4-8.
[26] 魏文智,李全义,王秋莲.Magerl技术结合单椎板夹固定术治疗对寰枢椎脱位患者并发症和生活质量的影响[J].临床和实验医学杂志,2017,16(21):2148-2152.
[27] RAJINDA P,TOWIWAT S,CHIRAPPAPHA P.Comparison of outcomes after atlantoaxial fusion with C1 lateral mass-C2 pedicle screws and C1-C2 transarticular screws[J].Eur Spine J,2017,26(4):1064-1072.
[28] CHUN D H,YOON D H,KIM K N,et al.Biomechanical comparison of four different atlantoaxial posterior fixation constructs in adults:a finite element study [J].Spine(Phila Pa 1976),2018,43(15):E891-E897.
[29] GOREK J,ACAROGLU E,BERVEN S,et al.Constructs incorporating intralaminar C2 screws provide rigid stability for atlantoaxial fixation[J].Spine(Phila Pa 1976),2005,30(13):1513-1518.
[30] SKOVRLJ B,QURESHI S A.Minimally invasive cervical spine surgery[J].J Neurosurg Sci,2017,61(3):325-334.
[31] 胡勇,袁振山.3D打印辅助置钉技术在颈椎外科手术治疗中的重要性[J].中华创伤杂志,2016,32(1):10-12.
[32] 蒲兴魏,罗春山,邱冰,等.改良3D打印导航模板辅助寰枢椎椎弓根螺钉置钉的临床应用[J].中华骨科杂志,2017,37(24):1511-1520.
[33] 马维虎.上颈椎骨折手术技术的选择与应用[J].中华创伤杂志,2019,35(11):966-969.
[34] ZANG Q,LIU Y,WANG D,et al.An Experimental biomechanical study on artificial atlantoodontoid joint replacement in dogs[J].Clin Spine Surg,2017,30(1):E1-E6.
[35] HU Y,DONG W X,HANN S,et al.Construction of finite element model for an artificial atlanto-odontoid joint replacement and analysis of its biomechanical properties[J].Turk Neurosurg,2016,26(3):430-436.
[36] TIAN W,LIU Y J,LIU B,et al.Guideline for posterior atlantoaxial internal fixation assisted by orthopaedic surgical robot[J].Orthop Surg,2019,11(2):160-166.